MIMAKI JFX-1631 PLUS SERIES

Experience the great benefits of UV LED printing combined with a dramatic increase in productivity.

Always striving for the best, Mimaki has achieved significant productivity enhancements for  its flatbed UV LED printer series JFX with up to 80 % higher speeds. 
The  new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models.
A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates.
In addition, Mimaki's IMS* technology ensures the highest image quality exceeding your customers' expectations.

*IMS=Intelligent Microstepping System

High Speed

As standard, JFX   plus series is now equipped with a post-curing unit that cures the print  after its first exposure by UV LEDs thus enabling nearly double the   print speed as previous models. Print service providers can now cater to  their clients' needs for fast turnarounds, quick changes and short run  orders while at the same time increasing productivity and efficiency.

*The speed charts above are in conditions of printing with CMYK.
Print speed varies according to substrate.

Please note that when using the post-curing unit for high speed   printing and curing, maximum print size is shortened by 150 mm (front), 250 mm (back) and 400 mm (total). The printer automatically switches   sizes when post-curing is selected. Therefore please make sure to adhere  to the maximum print sizes according to your selected print and curing  mode.
(The image on the left shows the maximum print size without post-curing)

Existing JFX-1631/1615 printers

JFX-1631/1615 printers can be upgraded to JFX plus series by   installing the post-curing optionally.Please contact your service   engineer for further details.

High Accuracy

IMS for highly detailed and accurate prints

The new head positioning mechanism uses high resolution linear scale for fine step accuracy of dot placement.This results in far fewer   banding artifacts and even the possibility to print legible 3pt   characters.

High resolution of 1200 x 1200 dpi and variable drops

High image quality is achieved by utilizing a resolution of up to   1200 x 1200 dpi and variable dot sizes. Even printing in 4-color mode   realizes a non-grainy print, thus prints show smooth gradations and   highly detailed images.

Ink variation

Different UV inks cater to your requirements

LH-100(CMYK+W+CL)

[Features] High scratch and chemical resistance, superior coloration.
[Main Appli-cations] Flat surfaces, acrylic and aluminum compound boards, styrene boards, CCNB etc.

LF-140 / 6 Color (K,C,M,Y,Lc,Lm) + W * LH-100 clear ink can be used together.

[Features]Gradation reproducibility is improvedwith light color inks.Ink flexibility gives the printed media bendability.
[Main Appli-cations] Soft plastic, leather, panel, POP and package

LF-200(CMYK+W)

[Features] 200% elasticity, suitable for embossing and other post-processing tasks.
[Main Appli-cations] Flat and uneven surfaces, vehicle wraps, vinyl chloride film, packaging, banners etc

* As ink flexibility of LF-200 ink and LF-140 ink vary according to the substrate, please verify your substrate in advance.

More vivid images with white ink

*Sample print on transparent acrylic

Pallid, sallow image due to colored/transparent substrate.

Original vivid image colors are displayed due to white ink layer underneath the image.

Clear ink adds more value to your prints

Glossy or matte finishing varnish with clear ink* realizes astounding  and eye-catching effects on your prints. Depending on your design, you  can add protective coating to protect surface or spot coating for design  accents.

* Clear ink can only be used with LH-100 ink

Haptic effects with multi-layered print

By printing several layers of ink and/or gloss, your images will not only look more enticing but also will have a haptic feel that will   satisfy your clients.

Hybrid

Print on rigid boards and roll media with the same machine

While printing on rigid substrates up to 50 mm thickness is standard,  JFX plus also answers the demand of print service providers for hybrid  printing on roll media. An optional roll unit is available that enhances  productivity and efficiency by accommodating unattended printing of  several or different jobs* enabling fast turnaround times.

* Each job is limited by the max. print size of JFX plus.

Ecology

Environmentally friendly printing

Almost no VOCs are generated by UV curing print. In addition, diodes that are used for Mimaki's UV LED system feature a long lifetime and are  using considerably less power than conventional UV lamps. Furthermore  by using Mimaki's Eco-cartridge system, waste is reduced as the ink pack  inside of the cartridge casing needs to be replaced.

* The post-curing unit employs a fluorescent UV tube lamp.